How Much to Charge for Embroidery: Pricing Jobs by Stitch Count

Most new embroidery shops and Etsy sellers underprice their first jobs. They look at what a blank shirt costs, add a few dollars, and forget that the real cost of embroidery is machine time — and machine time is driven almost entirely by stitch count. Here's how to work out what to charge for embroidery so every job actually pays you.

Why stitch count is the fairest way to price embroidery

Two logos can be the same size and take very different amounts of time to sew. A 3.5-inch outline logo might run 3,000 stitches; the same logo with a solid fill background can be 10,000 or more. Pricing by size alone means you lose money on dense designs and overcharge on light ones.

That's why most commercial shops price embroidery in one of two ways:

  • Per 1,000 stitches — a set rate multiplied by the design's stitch count, with a minimum charge per piece.
  • Stitch-count tiers — for example, up to 5,000 stitches, 5,001–10,000, 10,001–15,000, each tier with a fixed price. Easier for customers to understand, still based on stitches.

Either works. What matters is that the rate behind it comes from your own costs, not from a number you saw on a forum — rates vary a lot by region, machine type and whether you're a home business or a multi-head shop.

Typical stitch counts to expect

These are rough ranges for common placements. The actual count depends on how much of the design is filled versus outlined:

  • Left-chest logo (3–4 inches wide): roughly 4,000–10,000 stitches.
  • Cap front (about 2–2.5 inches tall): roughly 5,000–12,000 stitches.
  • Small sleeve or collar text: often under 3,000 stitches.
  • Full jacket back (10–12 inches): anywhere from 30,000 to well over 80,000 stitches.

A useful rule of thumb: a fully filled square inch at standard fill density comes out around 2,000 stitches. If a customer sends artwork before you have a stitch file, use our stitch count calculator to estimate the count and quote with confidence.

How to calculate your own rate per 1,000 stitches

  1. Work out your hourly cost. Add up what it costs to run the business for a month — machine payments, rent or space, electricity, software, insurance, and the wage you want to pay yourself — then divide by the hours you realistically stitch.
  2. Find your real stitching speed. A commercial machine may be rated at 1,000 stitches per minute or more, but trims, colour changes, thread breaks and re-hooping pull the real output well below that. Time a few of your own jobs from start to finish and use that number.
  3. Convert to a per-1,000 rate. If you actually sew 30,000 stitches in an hour and your hourly cost is $30, your break-even is $1.00 per 1,000 stitches. Add your profit margin on top.
  4. Set a per-piece minimum. Hooping, trimming and folding take the same time whether the design is 2,000 stitches or 6,000. A minimum charge covers that handling.

The numbers above are an example of the maths, not a market rate. Plug in your own.

Other costs to build into every quote

Digitizing (a one-time setup fee)

Every new logo needs a stitch file before the first piece is sewn. Most shops charge this as a separate setup fee, once per design, and then keep the file on record for re-orders. If you outsource it, our hand-digitized logo file service costs $10 for designs 6 inches or less and $20 for larger designs, with files emailed within 12 hours — so the setup fee is easy to pass on. For the full process, see how our digitizing service works.

Materials

Thread, bobbins, stabilizer, topping for towels and fleece, and needles. Individually small, but they add up on large orders.

Garments

If you supply the blanks, mark them up — you're carrying the cost and the risk of ordering errors. If the customer supplies them, many shops charge a little more per piece or ask the customer to accept the risk of a ruined item, because one bad sew-out means replacing someone else's garment.

Surcharges worth charging for

  • Caps: slower to hoop and stitch, and need cap-specific files. Our guide on how to digitize a logo for a hat explains why.
  • 3D puff: extra foam, extra digitizing and slower running.
  • Extra locations: each new placement means another hooping.
  • Many colour changes: on single-needle machines especially, each change costs time.
  • Rush jobs: bumping a job ahead of others has a cost — price it.

Quantity breaks: how to discount without losing money

Larger orders are cheaper per piece because setup is spread out and you hoop in a rhythm. But only discount what actually gets cheaper. The digitizing fee and set-up time drop per piece; stitch time per piece doesn't. A sensible approach is a few quantity tiers (for example 1–11, 12–23, 24–47, 48+) with the per-1,000 rate stepping down modestly at each tier, while the setup fee stays the same.

A simple quoting checklist

  1. Get the artwork, finished size and placement.
  2. Estimate or confirm the stitch count.
  3. Stitch count × your per-1,000 rate (or tier price), then apply the per-piece minimum.
  4. Add any surcharges: caps, puff, extra locations, rush.
  5. Add garments if you're supplying them.
  6. Add the one-time digitizing setup fee for new designs.
  7. Apply quantity breaks and send the quote in writing.

For Etsy and print-on-demand products where you don't need a customer's logo, you can skip the setup fee altogether by stitching from our ready-made embroidery designs — just check the licence terms for commercial use.

Related: Should You Outsource Embroidery Digitizing? A Shop Owner's Guide

Related: How Long Does It Take to Embroider a Shirt? Run Time Guide

Related: Embroidery Digitizing Fee: Should Your Shop Charge One?

Related: Embroidery Minimum Order Quantity: How to Set Your Shop's MOQ

Quick FAQ

Should I charge by the hour or by stitch count? Stitch count. Customers can't see your hourly time, but a stitch-based price is consistent, easy to explain, and scales automatically with how complex the design is.

Should I charge the customer for digitizing? Yes, as a one-time setup fee per design. Keep the file so re-orders don't pay it again, and ask for a new file if they want a very different size.

How do I quote before I have a stitch file? Estimate from the design size and how much of it is filled, then confirm the final price once the file is digitized. A calculator or a fast-turnaround digitizer keeps the gap short.

Need a stitch file before you can quote the job? Order custom embroidery digitizing — hand digitized, delivered within 12 hours, with free size changes and tweaks after delivery.

Back to blog