Embroidery Minimum Order Quantity: How to Set Your Shop's MOQ

"What's your minimum?" is one of the first questions a new embroidery customer asks, and one of the hardest for a new shop to answer. Set it too high and you turn away small clubs and businesses that would have re-ordered for years. Set it too low, or skip it entirely, and you end up running single shirts that barely cover the time it took to set them up. After more than two decades of digitizing for embroidery shops, here is how I'd work out an embroidery minimum order quantity that actually fits your costs.

Why embroidery shops set minimums at all

Most of the cost of a small embroidery job happens before the first stitch. Whether the order is 1 piece or 50, you still have to:

  • Get the design digitized (or pull and check an existing file)
  • Run a test sew-out and adjust if needed
  • Thread the machine with the right colors and set the color sequence
  • Choose stabilizer, set up hoops and mark placement
  • Handle the quote, artwork questions and invoicing

Call that fixed setup work. On a 48-piece order it disappears into the per-piece price. On a 2-piece order it is most of the job. A minimum is simply a way to make sure every order carries enough revenue to pay for its own setup.

Three common ways to structure a minimum

1. A hard minimum quantity

"Minimum 12 pieces per design." It is simple and easy to communicate. Shops commonly land somewhere in the 6–24 piece range, but your number should come from your own math (below), not from what the shop down the road does. The downside: you lose customers who only need three polos for a small team.

2. A small-order fee instead of a hard cutoff

Accept any quantity, but add a flat fee below a threshold — for example, a set charge on orders under 12 pieces. This keeps the door open for small customers while still covering setup. Many customers who start with a tiny order come back for bigger ones once they've seen the quality.

3. Tiered per-piece pricing

Price drops as quantity rises: one price for 1–5 pieces, a lower one for 6–11, lower again for 12–23, and so on. The setup cost is built into the higher small-quantity price. This is often the cleanest option because customers can see exactly how ordering more saves them money. Our guide on how much to charge for embroidery by stitch count covers how to build the per-piece side of those tiers.

How to calculate your own minimum

You don't need a spreadsheet model — just three numbers.

  1. Estimate your fixed setup cost per order. Time a few real jobs from quote to first good sew-out: artwork handling, file prep, threading, hooping setup, test stitch. Multiply that time by your hourly cost, then add any outside costs such as digitizing.
  2. Work out your margin per piece. Take your per-piece embroidery price and subtract the cost of thread, stabilizer, backing and machine run time for that piece. What's left is what each piece contributes toward setup and profit.
  3. Divide setup cost by margin per piece. The result is your break-even quantity. Round it up to a number that is easy to quote, and that's a sensible starting minimum.

Example (illustrative numbers only): if setup works out to $45 per order and each piece leaves you $6 after materials and run time, you need about 8 pieces just to cover setup. A minimum of 8–12 pieces, or a small-order fee on anything under that, would make sense. If the design has a high stitch count, run time per piece rises and the margin shrinks, which pushes the break-even number up. The stitch count calculator helps you estimate that before you quote.

Things that should change your minimum

Multi-head machines

If you run a 4- or 6-head machine, every cycle stitches several garments at once. A 6-piece order on a 6-head machine takes one run; a 7-piece order takes two. Setting minimums or price breaks in multiples of your head count keeps your machine fully loaded.

Re-orders with an existing file

Once a design is digitized and proven, the setup cost on the next order drops sharply — no new file, no test-sew guesswork. Many shops drop or reduce the minimum for re-orders of a design already on file. It is a good way to reward loyal customers without losing money.

Caps, jackets and harder placements

Cap frames, jacket backs and bags take longer to hoop and often need their own file. If those jobs cost you more setup time, it's fair to use a higher minimum or a separate small-order fee for them.

Personalization

Names on the same base design — for example, a team logo with a different name on each jersey — are effectively one setup with small text edits. You can treat the whole batch as one order toward the minimum.

How the digitizing cost affects your minimum

Digitizing is usually the largest single setup cost on a new design, so it has a big effect on where your break-even sits. Some shops charge it as a separate one-time line on the quote; others fold it into the small-order price. Our article on the embroidery digitizing fee walks through both approaches.

If you outsource, knowing the file cost up front makes the math easy. With our custom logo digitizing service, every file is hand digitized (no auto-conversion), priced at $10 for designs 6 inches or less and $20 for larger designs, and emailed to you within 12 hours in the format your machine needs — EMB, DST, PES, JEF, XXX, VP3, SEW, HUS and more. Size changes and tweaks after delivery are free, and if a file doesn't stitch right we re-digitize it until it does. A predictable, low file cost means less setup to recover, which lets you quote lower minimums with confidence. You can read how our digitizing service works for the full process.

Communicating your minimum without losing customers

  • Put it on your website and price list. Customers dislike finding a minimum at the end of a conversation.
  • Explain it in one line. "Every new design needs digitizing and machine setup, so small orders carry a setup charge."
  • Offer a path forward. Suggest adding a few pieces to reach the next price break, or combining garment types (polos and caps with the same logo) to reach the minimum.
  • Be consistent. Exceptions for one customer quickly become expectations for everyone.

Quick FAQ

Is there a standard minimum order for custom embroidery?

No single standard exists. Shops set minimums based on their own setup time, equipment and pricing. Many use a minimum in the 6–24 piece range or replace a hard minimum with a small-order fee.

Should different garments with the same logo count toward the minimum?

Usually yes, if the same file and placement work on all of them. If caps or jacket backs need a separate file or different setup, count them as a separate design.

Can I lower my minimum by reducing setup time?

Yes. Keeping proven files on record, organizing thread colors, and using clean, well-digitized files that sew right the first time all cut setup time, which lowers your break-even quantity.

Need a stitch file for your next small order? Order our custom embroidery digitizing service — hand digitized from $10 and delivered within 12 hours.

Back to blog